 Series
2200
Current to Pressure Transducer
SPECIFICATIONS
Input Signal: 4-20 mA, two-wire.
Air Supply: 20 (¡À2) psig for 3-15 psig; 1.4 (¡À0.14) kg/cm² for 0.21-1.1 kg/cm² output. 35 (¡À2) psig for 6-30 psig: 2.5 (¡À0.14) kg/cm² for 0.42-2.1 kg/cm² output.
Output: 3-15 psig (.21-1.1 kg/cm²), 6-30 psig (.42-2.1 kg/cm²).
Accuracy: ¡À0.15% of span (3-15 psig, 0.21-1.1 kg/cm²) ¡À0.25% of span (6-30 psig, 0.42-2.1 kg/cm²).
Repeatability: 0.05% of span.
Deadband: 0.02% of span.
Stability: 0.5% of span/6 months.
Power Requirement: 8-40 VDC. Loop powered. Internal resistance is 1000 ohms at 4 mA and 200 ohms at 20 mA.
Operating Current: 3.7 mA minimum, 200 mA maximum.
Temperature Limits: -20 to 150¡ãF (-29 to 66¡ãC).
Connection: 1/4" female NPT supply port (1) and 1/4" female NPT output port (2). 1/2" female NPT electrical conduit connection.
Air Consumption: 0.04 scfm (.02 l/s) steady state average; 0.06 scfm (.03 l/s) maximum.
Output Capacity: 4.0 scfm (1.9 l/s).
Failure Mode: Transducer always fails in the direct mode.
Enclosure: Internally purged NEMA 4X cast/machined aluminum with powder coat epoxy.
Weight: 2.5 lb (1.13 kg).
Agency Approvals: CE, CSA, FM.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
